Custom Color Printed Label Information

For information regarding available substrates, Label Stocks and their uses for your project see below.

Label Paper Stock

Papers are usually lower cost and lower performance than synthetic materials or films. Use a paper material for indoor product labeling and if the label does not need to be protected from moisture, chemicals, flexing or abrasion.

Label Papers
Bright White Paper (Permanent Adhesive)
This is our 2.9 mil matte-coated label paper with an ultra smooth coated face material for glossy print. Also Thermal Transfer printable if not printing over any ink. The adhesive is a modified acrylic dispersion. Permanent adhesive with good adhesion to a wide variety of substrates, including non-polar surfaces, films and corrugated board. Good low temperature performance. Temperature Ranges: Labeling Temperature min +32 ºF [0 ºC]. Service Temperature Ranges from -40 ºF [-40 ºC] to 200 ºF [93 ºC].

Use this material when you need the most inexpensive matte face stock, or an inexpensive face stock with Thermal Transfer capabilities. Good for most indoor product labeling that requires permanent adhesive, but does not require the highest quality of print. Examples: product identification, Thermal Transfer label applications, low end 4-color process printing.
 

Bright White Paper (Removable Adhesive)
This is our 2.9 mil matte-coated label paper with an ultra smooth coated face material for glossy print. Also thermal transfer printable if not printing over any ink. The adhesive is a rubber based removable adhesive with good adhesion to rough surfaces such as corrugated cardboard and for curved substrates such as test tubes. Can also be used as a deep freeze adhesive. Long term removable from smooth, even substrates restricted. Should not be exposed to direct sunlight or high temperatures for long periods of time.

ISEGA has given this adhesive approval for direct contact with dry and moist non-fatty foods. We recommend you test this material to make sure adhesive works for your application. Temperature Ranges: Labeling Temperature min +32 ºF [0 ºC]. Service Temperature Ranges from -40 ºF [-40 ºC] to 200 ºF [93 ºC].

Use this material when you need an inexpensive matte face stock, good for most indoor product labeling that requires the label to be removable. Examples: thermal transfer label applications requiring a removable adhesive.

Bright White Paper (Freezer Grade Adhesive)
This is our 2.9 mil matte-coated label paper with an ultra smooth coated face material for glossy print. Also thermal transfer printable if not printing over any ink. The adhesive is a modified acrylic dispersion all-temperature/deep freeze adhesive. Should be used when very good adhesion at low temperatures is required. Freezer adhesive is ideal for frozen or refrigerated products. Temperature Ranges: Labeling Temperature min -20 ºF [-29 ºC]. Service Temperature Ranges from -65º F [-54 ºC] to 200º F [93 ºC].

Use this material when you need an inexpensive indoor matte face stock, are not concerned about moisture, but the product needs to be frozen or refrigerated. Examples: medicine, product labeling.


Bright White Paper - Block Out (Opaque Adhesive)

This is our 3.1 mil thermal transfer premium coated opaque, ultra-smooth, matte-coated label paper with opaque reverse side coating. If not printing over any ink, this material is thermal transfer printable. Adhesive is black or grey, making the label opaque and will block information beneath the label. Adhesive is a permanent acrylic dispersion with good adhesion to all normal substrates, including non-polar surfaces, films and corrugated board. Good low temperature performance. Temperature Ranges: Labeling Temperature min +32 ºF. Service Temperature Ranges from -4 ºF [-20 ºC] to 176 ºF [80 ºC].

Use this material for indoor usage to cover up a label beneath for corrections, updates, or new barcodes.

Gloss White Paper (Freezer Grade Adhesive)
Bright white semi-gloss face stock with good opacity and medium gloss level. The adhesive is a patented formula designed to eliminate virtually all roll edge adhesive bleed and eliminate the need to strip a matrix. It is a general purpose, permanent acrylic emulsion adhesive. Temperature Ranges: Labeling Temperature min +25 °F [-4 °C] on most surfaces, Service Temperature Ranges from -75 ºF [-60 ºC ] to 200 ºF [93 ºC].

Use this material when you need the most inexpensive gloss face stock. This material is good for most indoor product labeling. Examples: product identification, sauces, jellies, dressings. If you need a matte finish, consider adding a matte varnish or over laminate.


Fluorescent Paper (Permanent Adhesive)
This is our selection of  chartreuse (yellow), pink, red, green, orange] – 3.8 mil fluorescent papers. These materials work great for indoor applications needing fluorescent colors. Use black ink to create text labels but will accept all other colors. If printing color on these materials, a $125.00 press proof is suggested due to color changes caused by the material’s color. The adhesive is a modified acrylic with good adhesion to all normal substrates, including non-polar surfaces, films and corrugated board. Good low temp performance as well. Temperature Ranges: Labeling Temperature min +32 ºF [0 ºC], Service Temperature Range -4 ºF [-20 ºC] to 176 ºF [80ºC].

Use fluorescent paper to grab attention and when application is for indoor use. Examples: eye-catching labeling for price marking, promotional use and labels printed on lasers and copiers.


Gold Foil Paper (Permanent Adhesive)
This is our  2.7 mil premium mirror finish, bright gold metalized paper for indoor use with a modified acrylic topcoat. All colors of inks show up; inks are transparent so entire label will have shine even where area has inks. If printing color, a $125.00 press proof is suggested to make sure final product is to your specifications. The adhesive is rubber-based and features high initial tack and ultimate bond strength to a wide variety of substrates, including low surface energy plastics, treated glass and corrugated. Temperature Ranges: Labeling Temperature min +25 ºF [-4 ºC], Service Temperature Ranges -65 ºF [-54 ºC] to 160 ºF [71 ºC].

Use gold foil paper in applications requiring a deluxe appearance of metalized paper and when application is for indoor use. Examples: food, cosmetic, toiletries, beverage and more.


Silver Foil Paper (Permanent Adhesive)
This is our 2.9 mil mirror finish, bright silver metalized paper for indoor use. All colors of ink show up; inks are transparent so entire label will have shine even where area has ink. If printing color, a press proof is suggested to make sure final product is to your specifications.

The adhesive is an all-temperature adhesive developed to provide good room temperature performance and excellent cold temperature performance without sacrificing good die cutting and stripping properties. Because of its cold-temperature properties and good adhesion to corrugated cardboard, this adhesive is an ideal adhesive for warehouse applications. Temperature Ranges: Labeling Temperature min -20 ºF [-29 ºC], Service Temperature Ranges -65 ºF [-54 ºC] to 200 ºF [93 ºC].

Use silver foil paper in applications requiring a deluxe appearance of metalized paper and when application is for indoor use.

Examples: food, cosmetic, toiletries, beverage and more.

Wine Label Papers

Estate #4 (Permanent Adhesive)
This is our 5.1 mil bright white, vellum finish, wet strength label paper. High quality label paper for wine and beverage applications where image is as important as performance. Designed for roll-to-roll applications.

Adhesive is a general purpose, permanent adhesive with water wash off characteristics. Good adhesion to dry and cold bottles, offers good water resistance in ice bucket immersion. Water wash off at 110 ºF [43 ºC] for label removal. Temperature Ranges: Labeling Temperature min +32 ºF [0 ºC], Service Temperature Ranges -4 ºF [-20 ºC] to 176 ºF [80 ºC]. Rougher texture.

This material has an antique, matte finish and is specially made for wine bottle labels.

Estate #9 Wine Bottle Label Stock (Permanent Adhesive)
This is our 5.4 mil cream, laid finish, wet strength label paper. High-quality label paper for wine and beverage applications where image is as important as performance. Adhesive is a general purpose, permanent adhesive with water wash off characteristics.

Good adhesion to dry and cold bottles, offers good water resistance in ice bucket immersion. Water wash off at 110 ºF [43 ºC] for label removal. Temperature Ranges: Labeling Temperature min +32 ºF [0 ºC], Service Temperature Ranges -4 ºF [-20 ºC] to 176 ºF [80 ºC]. Has more recycled look characteristics, more of a brown tone than Estate #4.

This material has an antique, matte finish and is specially made for wine bottle labels. We suggest that you call for samples.


Classic Crest (Permanent Adhesive)
This is our Classic Crest is a Bright White vellum, smooth uncoated wet strength paper face stock produced specifically for wine, beer and high end classic look applications. This permanent adhesive which is removable in a minimum of 100 degree F water. Developed with good initial tack and ultimate adhesion. This can be used as a permanent adhesive but become removable when immersion in water hotter than 100 degrees F. Temperature Ranges: Labeling Temperature min +20 ºF [-7 ºC], Service Temperature Ranges -65 ºF [-54 ºC] to 200 ºF [93 ºC].

This material has a matte finish and is specially made for wine bottle labels. Use this material for wine, beer and high end applications where you want your label to have a classic vellum look and feel.


Classic Linen (Permanent Adhesive)
This is our 60# uncoated, wet strength paper with a rich linen laid finish. Adhesive is developed with good initial tack and ultimate adhesion; it can be used as a permanent adhesive on many substrates, yet be removed from that substrate after immersion in water hotter than 100º F. Temperature Ranges: Labeling Temperature min +20 ºF [7 ºC], Service Temperature Ranges -65 ºF [-54 ºC] to 200 ºF [93 ºC].

Use this linen laid material for wine and high-end beverages and gourmet foods labels.


Cambric Birch (Permanent Adhesive)
This is our 70# uncoated paper with a subtle linen finish, subtle fibered shades, and a natural creamy tan color. Adhesive is developed with good initial tack and ultimate adhesion; it can be used as a permanent adhesive on many substrates, yet be removed from that substrate after immersion in water hotter than 100º F. Temperature Ranges: Labeling Temperature min +20 ºF [7 ºC], Service Temperature Ranges -65 ºF [-54 ºC] to 200 ºF [93 ºC].

Use this fibered shade material for wine and high-end beverages and gourmet foods labeling.


Tag Stock
7 Mil White TTR Paper Tag (No Adhesive)
This is our 7mil matte-coated thermal transfer paper tag. Multipurpose tag stock with engineered thermal transfer receptive coating for paper tag and ticket applications.
Use this material for indoor use and when you do not want an adhesive. Stock is thicker than paper, but thinner than cardboard. Example: product tags, tickets.
 

12 Mil White C1S TTR Paper Tag (No Adhesive)

This is our 12 mil matte-coated thermal transfer paper tag. Multipurpose tag stock with engineered thermal transfer-receptive coating for paper tag and ticket applications.

Use this material for indoor use and when you do not want an adhesive. Stock is thicker than paper, but thinner than cardboard. Example: product tags, tickets.



Synthetic Label Stock

Synthetic materials are more durable than paper and perform in harsh environments. Use a synthetic material if the label will be outdoors, exposed to heat, moisture or chemicals, or if your label needs to be more durable to withstand flexing and/or abrasion. Synthetic materials print cleaner than papers, and will last a long time outside.

6 Mil Synthetic All Weather Tag(No Adhesive)
This is our 6 mil bright white synthetic tag with great durability for outdoors use. Good for lumber, steel, plant tags and any other application that may need a durable indoor/outdoor tag. Thermal transfer printable if not printing over any ink. Can be produced with “air eject holes”, “notches at perforations”, and is finished in sheets or rolls.

Use this material when you have an outdoor application and do not want an adhesive. Stock is thicker than paper, but thinner than cardboard. Example: nursery tags.


Durable Synthetics
White Polyester (Permanent All Temp Adhesive)
 This is our most durable white material. 2 mil top coated glossy white film face stock offering high heat, tear, abrasion, solvent, and water resistance. It features excellent printability with conventional print methods, including thermal transfer when paired with the appropriate ribbon.

This material will last a long time outside without yellowing. The adhesive is a clear all temperature permanent pressure sensitive emulsion acrylic adhesive featuring excellent adhesion to a variety of surfaces over a broad temperature range. It has excellent converting characteristics on press.

The high initial tack of this adhesive to low surface energy Polyolefins makes it an ideal for blow on applications. Temperature Ranges: Labeling Temperature min -10 ºF [-4 ºC], Service Temperature Ranges from -65 ºF [-54 ºC] to 200 ºF [93 ºC].
Use this white material for indoor and outdoor labels or labels that will be used in harsh environments. Examples: candles, durable goods, property identification, asset labels.
 

White Polyester (Removable Adhesive)
This is our most durable white material. 2 mil pigmented white semi-gloss film face stock featuring excellent tear strength, heat resistance, dimensional stability, opacity, and chemical resistance. This material will last a long time outside without yellowing.

The adhesive is a visually clear acrylic based removable adhesive with versatile performance properties. The adhesive exhibits good adhesion and clean long term removability from most smooth surfaces such as hard plastics, metal, glass, paper, Teflon, textured PVC and corrugated surfaces.

The adhesive is a removable adhesive developed to provide good temporary adhesion to a variety of substrates (including cold wet/damp surfaces). We recommend you test this material to make sure adhesive works for your application. Temperature Ranges: Labeling Temperature min +50 ºF [10 ºC], Service Temperature Ranges from -40 ºF [-40 ºC] to 250 ºF [121 ºC].

Use this white material when you need the label to release from the product without leaving a residue and the label will be used indoors or outdoors or in a harsh environment. Examples: durable goods, rating plates, product identification, work in process or other temporary labels.


 White Polyester with Lay flat Liner (Permanent Adhesive)
Gloss white 2 mil polyester face sheet with a 90# Polycoated lay flat liner. This material is used for sheeted applications that require the durability of polyester material and the thick feeling of a vinyl.

The liner is thicker, heavier, and lays flat. Material comes with a clear solvent acrylic permanent adhesive with good initial tack to a variety of substrates. Temperature Ranges: Labeling Temperature min +50 ºF [10 ºC], Service Temperature Ranges from -65 °F [-54 ºC] to +225 °F [107 ºC].

Use this material for any label that is to be sheeted or individually cut out. Examples: bumper stickers, decals, product labeling.

Clear Polyester (Permanent Adhesive)
This is our most durable clear material. 2 mil clear polyester is a highly transparent film face stock featuring excellent tear strength, heat resistance, waterproof, dimensional stability and chemical resistance.

This material will last a long time outside without yellowing. The adhesive is an excellent general-purpose industrial grade clear permanent acrylic adhesive. It features high initial tack to most high and medium surface energy substrates.

Looks best when applied to opaque white or light colored backgrounds. Temperature Ranges: Labeling Temperature min +25 ºF [-4 ºC], Service Temperature Ranges from -40 ºF [-40 ºC] to 300 ºF [149 ºC].

Use this clear material if you wish to show the product through the label and the label will be used outdoors or in a harsh environment. Examples: candles, durable goods, product identification, rating plates, work in progress, property identification, asset labels.

Clear Polyester (Repositionable Adhesive)
This is our most durable clear material. 2 mil clear polyester is a highly transparent film face stock featuring excellent tear strength, heat resistance, waterproof, dimensional stability and chemical resistance. This material will last a long time outside without yellowing.

The adhesive is a repositionable adhesive developed to provide good temporary adhesion to a variety of substrates (including cold wet/damp surfaces). It exhibits good adhesion and clean long term removability from most smooth surfaces such as hard plastics, metal, glass, paper, Teflon, textured PVC and corrugated surfaces. Temperature Ranges: Labeling Temperature min +20 ºF [-7 ºC], Service Temperature Ranges from -20 ºF [-29 ºC] to 250 ºF [121 ºC].

Use this clear material when you need the label to cleanly release from the product without leaving a residue, you need to show product through the label and the label will be used outdoors or in a harsh environment. Examples: mirrors, glass, windows, book covers.
 

Retro-Reflective (Permanent Adhesive)
This is our 5.5 mil retro-reflective polyester film face stock designed to reflect light back to its reflectivity value of 50 candel as per lumen when tested per ASTM E810; -4 degree entrance angle, 0.2 degree observation angle. Adhesive is a clear adhesive featuring good initial tack, high shear, minimal cold flow and ultimate adhesion to a wide variety of substrates. Temperature Ranges: Labeling Temperature min +45 ºF [-7 ºC], Service Temperature Ranges from -40 ºF [-40 ºC] to 300 ºF [148 ºC].

Use this reflective material for applications requiring long-range scannable barcodes, such as warehouse shelving and material tracking. It is an excellent choice for variable information labels. It also offers eye-catching appeal in promotional and kiddie sticker applications.


Chrome Silver Polyester (Permanent Adhesive)
This is our Top coated 2 mil bright chrome polyester is a bright metallic film featuring excellent tear strength, heat resistance, dimensional stability, opacity and chemical resistance. Designed for printing with most solvent and some water-based flexographic inks.

Suitable for thermal transfer printing applications with select thermal transfer ribbons. Material comes with an excellent general purpose industrial grade clear permanent acrylic adhesive. Features high initial tack to most high and medium surface energy substrates: Labeling Temperature min +25 ºF [-4 ºC], Service Temperature Ranges from -40 ºF [-40 ºC] to +300 ºF [149 ºC].

Use this material for a high metallic look, or to mimic the look of hot stamping. It can be used outdoors or in harsh environments. Examples: durable goods, power tools, lawn and garden, electronic components, parts identification, inventory control, product identification.


Matte Silver Polyester (Permanent Adhesive)
This is our most durable matte silver material. 2 mil matte silver polyester is a good material if you would like your product to stand out from the norm. Silver film face stock featuring excellent tear strength, heat resistance, dimensional stability, opacity, and chemical resistance.

This material will last a long time outside without yellowing. Matte silver has a smooth satin silver finish. The adhesive is an excellent general-purpose industrial grade clear permanent acrylic adhesive. It features high initial tack to most substrates. Temperature Ranges: Labeling Temperature min +50 ºF [10 ºC], Service Temperature Ranges from -40 ºF [-40 ºC] to 302 ºF [150 ºC].

Use this material for labels with a matte silver look that can be used outdoors or in harsh environments. Examples: durable goods, power tools, lawn and garden, electronic components, parts identification, inventory control, product identification.


 Brushed Silver Polyester (Permanent Adhesive)
This is our most durable brushed silver material. 2 mil UL recognized silver brushed polyester is a good material if you would like your product to stand out from the norm. This material will last a long time outside without yellowing. Brushed silver is a satin silver finish with streaks resembling brush marks.

Adhesive is a standard permanent adhesive, which offers excellent adhesion to a wide variety of substrates. Temperature Ranges: Labeling Temperature min +50 ºF [10 ºC], Service Temperature Ranges from -40 ºF [-40 ºC] to 302 ºF [150 ºC].
Use this material for labels with a brushed silver look that can be used outdoors or in harsh environments.

Examples: nameplates, product identification, durable goods, equipment and machinery, power tools, lawn and garden labels.

Prism Holographic Polyester (Permanent Adhesive)
This is our  2 mil rainbow holographic polyester film which has been embossed and metallized with a holographic pattern providing a high degree of visual shelf appeal. Both sides of the polyester film have been pre-treated to promote metal and ink adhesive.

The adhesive is a clear general purpose permanent acrylic adhesive. It exhibits a balance of high cohesive strength and adhesion to low surface-energy substrates for lasting performance on squeezable containers. Specifically designed to exhibit excellent wet out characteristics and short-term removability.

Meets the requirements of FDA21 CFR172.105 for indirect food contact. Temperature Ranges: Labeling Temperature min +23 ºF [-5 ºC], Service Temperature Ranges from -20 ºF [-29 ºC] to 200 ºF [93 ºC].

Use this holographic material for applications in which you would like a holographic look or need to stand out on the shelves. It also offers eye-catching appeal in promotional and kiddie sticker applications.
 

Gloss White Polypropylene (Permanent Adhesive)
This is our 2.3 mil top coated white gloss polypropylene film. Biaxially oriented with excellent hot/cold moisture resistance, high stiffness for conversion and automatic dispensing.

Will perform well in harsh, wet, hot, cold environments. It has a Cold Temperature emulsion acrylic permanent adhesive which exhibits high initial tack and very good adhesion to a variety of substrates including corrugated, rigid plastics, films, glass and painted metal substrates.

It is not recommended for long period water immersion. Temperature Ranges: Labeling Temperature min +25 ºF [-4 ºC], Service Temperature Ranges from -10 ºF [-23 ºC] to 200 ºF [93 ºC].

Use this gloss white material for any application where you want your product to resist moisture, chemicals, harsh environments, or a high quality print on a low cost synthetic. Good alternate to white polyester.


Gloss White Polypropylene (Freezer Adhesive)
This is our 2.3 mil top coated white gloss polypropylene film. Biaxially oriented with excellent hot/cold moisture resistance, high stiffness for conversion and automatic dispensing.

Will perform well in harsh, wet, hot, cold environments. Adhesive exhibits high initial tack and adhesion, even on most textured and hard to label substrates, including corrugated. Temperature Ranges: Labeling Temperature min +25 ºF [-4 ºC], Service Temperature Ranges from -65 ºF [-54 ºC] to 200 ºF [93 ºC].

Use this gloss white material if you need to apply at low temperatures, frozen products, or if your item is being placed into extreme sub temperatures.


Gloss White BOPP with Lay flat Liner (Permanent Adhesive)
This is our Gloss white 2 mil biaxially oriented polypropylene face sheet with a 6 mil lay flat liner. This material is used for sheeted applications that require some durability but not as much as you would need with our full polyester with lay flat liner.

This material has the thick feeling of vinyl. The liner is thicker, heavier, and lays flat. Material comes with an adhesive that exhibits high initial tack and adhesion, even on most textured and hard to label substrates, including corrugated. Temperature Ranges: Labeling Temperature min +25 ºF [-4 ºC], Service Temperature Ranges from -65 ºF [-54 ºC] to +200 ºF [93 ºC].

Use this material for any label that is to be sheeted or individually cut out. Examples: bumper stickers, decals, product labeling. Lower cost than the full polyester with lay flat liner.


Matte White Polypropylene (Permanent Adhesive)
This is our  3 mil matte white polypropylene is thermal transfer printable. Perfect for an application that needs a low cost matte synthetic (polypropylene is half the cost of polyester). Polypropylene is waterproof and durable, but not as durable as polyester. Polypropylene will stretch, but is hard to tear. Polyester will not stretch.

The adhesive is an all Temperature acrylic adhesive that performs in both cold and damp environments and in elevated temperature applications. Temperature Ranges: Labeling Temperature min -20 ºF [-29 ºC], Service Temperature Ranges from -65 ºF [-54 ºC] to 200 ºF [93 ºC].

Use this matte material if you have an indoor application, you are concerned about moisture, need a material that won’t tear easily, and is lower cost than polyester. Examples: coffee bags, plastic bags, and water bottles. Not the best for fine lines; use Gloss White Polypropylene for fine lines and small text. If you need a matte finish, please consider adding a matte varnish or a matte over laminate.


Matte White Polypropylene (Repositionable Adhesive)
This is our 3.2 mil matte white coated polypropylene based film. This material is a matte synthetic but the ink will finish glossy. Perfect for an application that needs a low cost matte synthetic (polypropylene is half the cost of polyester).

Polypropylene is waterproof and durable, but not as durable as polyester. Polypropylene will stretch, but is hard to tear. Polyester will not stretch. The repositionable adhesive removes easily like a Post-it note and exhibits good adhesion and clean long term removability from most smooth surfaces such as hard plastics, metal, glass, paper, Teflon, textured PVC and corrugated surfaces.

The adhesive is a repositionable adhesive developed to provide good temporary adhesion to a variety of substrates (including cold wet/damp surfaces). We recommend you test this material to make sure adhesive works for your application. Temperature Ranges: Labeling Temperature min +20 ºF [-7 ºC], Service Temperature Ranges from -20 ºF [-29 ºC] to 250 ºF [121 ºC].

Use this matte material when you need the label to cleanly release from the product without leaving a residue and you need a durable low cost solution for a waterproof indoor application. Examples: mirrors, glass, windows, book covers.


Squeezable BOPP (Permanent Adhesive)
This is our  glossy white, biaxially oriented polypropylene designed with a unique top coating to be compatible with water based and solvent inks. This material is a good fit for applications where the label needs to be flexible, adjust to odd surface curvatures or possible hot and cold fill applications. The adhesive is a clear all temp acrylic adhesive featuring excellent adhesion to a variety of surfaces with film face stocks. It covers a broad temperature range and has excellent converting characteristics on press. Temperature Ranges: Labeling Temperature min -10 ºF [-23 ºC], Service Temperature Ranges from -65 ºF [-54 ºC] to 200 ºF [93 ºC].

Use this material in applications where the label needs to be flexible. For example; hard hats, toothpaste type tubes, odd surface curvatures, or possible hot and cold fill applications where the label needs to expand and contract with the container.


Gloss BOPP with Opaque Silver Backing for Cover Up Applications (Permanent adhesive)
 This is our highly opaque, 2.3 mil glossy white, biaxially-oriented polypropylene designed with a print receptive topcoat and metallized backside to make the label opaque. It is ideal for cover-up as well as other prime label applications.

The adhesive is a clear, general purpose, emulsion acrylic permanent adhesive designed for applications with film face stocks. Excellent ultimate adhesive to polyethylene, polypropylene and glass. Well suited for small, cylindrical labeling and is glove friendly. Temperature Ranges: Labeling Temperature min -40 ºF [-40 ºC]. Service Temperature Ranges from -40 ºF [-40 ºC] to 200 ºF [93 ºC].

Use this material if you want to cover up information beneath the label, or for other prime label applications.


UL Certified Materials
White Gloss Polyester (Permanent Adhesive)
This is our UL recognized under UL 969 – UL File No. PGJ12.MH16635 Printing Materials – Component.
This 2 mil gloss top coated white polyester provides consistent surface smoothness, excellent dimensional stability and endurance to varying temperatures. Material is coated with an aggressive, permanent acrylic adhesive and backed with a 50 lb. bleached kraft roll form release liner.

Gloss topcoat resists smudging and abrasion when printed with resin and wax/resin thermal transfer ribbons. Permanent pressure-sensitive acrylic adhesive bonds well to low and high-surface energy plastics, metal, powder coated paint, paint, ceramic, paper/fiber, glass and fiberglass. Temperature Ranges: Labeling Temperature min +50 ºF [10 ºC], Service Temperature Ranges from -40 ºF [-40 ºC] to 302 ºF [150 ºC].

Use this gloss top coated white polyester material for appliance and compliance labeling when critical information regarding product model numbers and specifications are needed; product or parts identification, authentication and tracking, inventory control, product identification, lab specimen tracking, microscope slide tacking and diagnostics, or any high-quality label that needs to resist a variety of environmental stresses while providing critical combination of durability, aesthetic appeal and efficiency.


White Matte Polyester (Permanent Adhesive)
This is our UL recognized under UL 969 – UL File No. PGJ12.MH16635 Printing Materials – Component. CUL recognized under UL file No. PGG18.MH16635 Printing Materials Certified for Canada – Component – under CAN/CSA standard C22.2, No. 0.15.

This 2 mil matte top coated white polyester provides consistent surface smoothness, excellent dimensional stability and endurance to varying temperatures. Material is coated with an aggressive, permanent acrylic adhesive, and backed with a 50 lb. bleached kraft roll form release liner. Matte topcoat film designed for cross-technology printability via impact, laser, electron beam, wax, resin and wax/resin thermal transfer ribbons.

Topcoat provides excellent resistance to chemicals, moisture, smudging and scratching. Permanent pressure-sensitive acrylic adhesive bonds well to low and high-surface energy plastics, metal, powder coated paint, paint, ceramic, paper/fiber, glass and fiberglass. Temperature Ranges: Labeling Temperature min +50 ºF [10 ºC], Service Temperature Ranges from -40 ºF [-40 ºC] to 302 ºF [150 ºC].

Use this matte top coated white polyester material when you need a cross-technology printable material. Use for compliance labels for consumer electronics containing critical information regarding product model numbers and specifications, or any high-quality label that needs to resist a variety of environmental stresses while providing critical combination of durability, aesthetic appeal and efficiency.
 

Clear Gloss Polyester (Permanent Adhesive)
 UL recognized under UL 969 – UL File No. PGJ12.MH16635 Printing Materials – Component.

This is our 2 mil gloss top coated clear polyester provides consistent surface smoothness, excellent dimensional stability and endurance to varying temperatures. Material is coated with an aggressive, permanent acrylic adhesive and backed with a 50 lb. bleached kraft roll form release liner.

Topcoat resists smudging and abrasion when printed with resin and wax/resin thermal transfer ribbons. Permanent pressure sensitive acrylic adhesive bonds well to low and high surface energy plastics, metal and powder coated paint. Temperature Ranges: Labeling Temperature min +50 ºF [10 ºC], Service Temperature Ranges from -40 ºF [-40 ºC] to 302 ºF [150 ºC].

Use this clear gloss polyester when you need compliance labels for appliances containing critical information regarding product model numbers and specifications or any high-quality label that needs to resist a variety of environmental stresses while providing critical combination of durability, aesthetic appeal and efficiency.


Clear Matte Polyester (Permanent Adhesive)
UL recognized under UL 969 – UL File No. PGJ12.MH16635 Printing Materials – Component. CUL recognized under UL file No. PGG18.MH16635 Printing Materials Certified for Canada – Component – under CAN/CSA standard C22.2, No. 0.15.

This is our 2 mil matte top coated clear polyester provides consistent surface smoothness, excellent dimensional stability and endurance to varying temperatures. Material is coated with an aggressive, permanent acrylic adhesive and backed with a 50 lb. bleached kraft roll form release liner. Matte top coated film is designed for cross-technology printability via impact, laser, electron beam, wax, resin and wax/resin thermal transfer ribbons.

Topcoat provides excellent resistance to chemicals, moisture, smudging, and scratching. Permanent acrylic pressure sensitive adhesive bonds well to low and high surface energy plastics, painted metal, powder-coated paint, polycarbonate and fiberglass. Temperature Ranges: Labeling Temperature min +50 ºF [10 ºC], Service Temperature Ranges from -40 ºF [-40 ºC] to 302 ºF [150 ºC].

Use this matte top coated clear polyester when you need a cross-technology printable material. Use for warning and instructional labels that contain critical information, appliance brand identity labels or any high-quality label that needs to resist a variety of environmental stresses while providing critical combination of durability, aesthetic appeal and efficiency.


Gloss Silver Polyester (Permanent Adhesive)
UL recognized under UL 969 – UL File No. PGJ12.MH16635 Printing Materials – Component.

This is our 2 mil gloss top coated silver gloss polyester provides consistent surface smoothness, excellent dimensional stability and endurance to varying temperatures. Material is coated with an aggressive, permanent pressure-sensitive acrylic adhesive, and backed with a 50 lb. bleached kraft roll form release liner.

Topcoat resists smudging and abrasion when printed with resin and wax/resin thermal transfer ribbons. Permanent acrylic pressure-sensitive adhesive bonds well to low- and high-surface energy plastics, painted metal, powder-coated paint, polycarbonate and fiberglass. Temperature Ranges: Labeling Temperature min +50 ºF [10 ºC], Service Temperature Ranges from -40 ºF [-40 ºC] to 302 ºF [150 ºC].

Use this gloss top coated silver polyester when you need a conventional and thermal transfer material.

Use for appliance labels containing critical information regarding product model numbers and specifications; automotive, industrial, electronic parts identification, authentication and tracking, inventory control, agency recognition, or any high-quality label that needs to resist a variety of environmental stresses while providing critical combination of durability, aesthetic appeal and efficiency.
 

Matte Silver Polyester (Permanent Adhesive)
UL recognized under UL 969 – UL File No. PGJ12.MH16635 Printing Materials - Component. CUL recognized under UL file No. PGG18.MH16635 Printing Materials Certified for Canada – Component – under CAN/CSA standard C22.2, No. 0.15.

This is our 2 mil matte top coated silver matte polyester provides consistent surface smoothness, excellent dimensional stability and endurance to varying temperatures.

Material is coated with an aggressive, permanent acrylic pressure-sensitive adhesive, and backed with a 50 lb. bleached kraft roll form release liner. Topcoat film is designed for cross-technology printability via impact, laser, electron beam, wax, resin and wax/resin thermal transfer ribbons, and provides excellent resistance to chemicals, moisture, smudging and scratching. Permanent acrylic pressure-sensitive adhesive bonds well to low- and high-surface energy plastics, painted metal, powder-coated paint, polycarbonate and fiberglass. Temperature Ranges: Labeling Temperature min +50 ºF [10 ºC], Service Temperature Ranges from -40 ºF [-40 ºC] to 302 ºF [150 ºC].

Use this matte top coated silver polyester when you need a cross-technology printable material.

Use for appliance and compliance labels containing critical information regarding product model numbers and specification, or any high-quality label that needs to resist a variety of environmental stresses while providing critical combination of durability, aesthetic appeal and efficiency.
 
Tamper Evident
 
Matte White Tamper Void Polyester (Permanent Adhesive)
This is our top coated 2 mil white voidable polyester incorporates a pattern release layer for tamper-evidence. The face stock is specially top coated to enhance flexographic, UV letterpress, and thermal transfer printing. Material comes with a permanent adhesive featuring high initial tack, minimal cold flow, and ultimate bond strength to a wide variety of surfaces.

It has excellent holding power, which helps prevent edge lift and butterflying of labels when applied to small diameter surfaces. It also provides excellent die cutting and stripping characteristics as well as automatic labeling features. It is suitable for use in applications where Autoclave, Gamma Radiation and EtO sterilization methods are used. Temperature Ranges: Labeling Temperature min +50 ºF [10 ºC], Service Temperature Ranges from -65 ºF [-54 ºC] to 250 ºF [121 ºC].

Use this material when you would like to note that a product is unusable or void if label is removed from product.


Chrome Silver Tamper Void Polyester (Permanent Adhesive)
This is our Top coated 2 mil gloss reverse void, silver metalized polyester with a durable and aggressive permanent acrylic adhesive and a 3.2 SCK liner used for tamper evident labeling. When the label is removed from the substrate, the metalizing splits from the polyester film leaving an imprinted “void” pattern showing undeniable evidence of tampering. The adhesive is a high performance, durable, permanent acrylic emulsion with aggressive initial tack, excellent ultimate adhesion and mandrel hold.

It is extremely chemical and solvent resistant and has very good adhesion to various high and low energy substrates. Temperature Ranges: Labeling Temperature min +40 ºF [4 ºC], Service Temperature Ranges From -40 ºF [-40 ºC] to 302 ºF [150 ºC].

Use this material when you would like a chrome finish and you would like to note that a product is unusable or void if label is removed from product.


Matte Silver Tamper Void Polyester (Permanent Adhesive)
This is our  Top coated 2 mil matte silver metalized void polyester with a durable and aggressive permanent acrylic adhesive and a 50# SCK liner used for tamper evident labeling. When the label is removed from the substrate, the matte silver metalizing splits from the polyester film leaving an imprinted “void” pattern showing undeniable evidence of tampering.

The adhesive is a high performance, durable, permanent acrylic emulsion with high initial tack with strong permanent bonding to a wide variety of substrates. It has excellent chemical and UV resistance and has very good adhesion to various high and low energy substrates. Temperature Ranges: Labeling Temperature min +45 ºF [7 ºC], Service Temperature Ranges From -30 ºF [-34 ºC] to 300 ºF [149 ºC].

Use this material when you would like a matte silver finish and you would like to note that a product is unusable or void if label is removed from product.


Destructible White Polyethylene (Permanent Adhesive)
2.0 mil destructible white polyethylene destructs or distorts easily. When attempting to remove an adhered label, it will break down into pieces, not allowing the label to be removed. Product comes with an aggressive permanent rubber based adhesive, which offers excellent adhesion to a wide variety of surfaces. Temperature Ranges: Labeling Temperature min +50 ºF [10 ºC], Service Temperature Ranges from -40 ºF [-40 ºC] to 176 ºF [80 ºC].

Use this material when labeling consumer durables, consumer electronics, tamper evident/security/authenticity, healthcare and pharmaceutical products where you do not want the label to be removed.
 

You may get a Label Quote using any of the above label stocks using the the form above to get a quote.  https://www.uslabel.net/pages/custom-color-printed-label-quote or call Roy for Details at 888-933-8498.

Spin to win Spinner icon