Easy to use for any round bottle or container ranging from½ inch to 4 inch inch diameter, the LB-2 has built inch product fixtures for consistent placement, automatic overhead pressure arm and can apply a front label or a front and back label (with alternating labels on the web), is built for 24/7 productivity, has a powered rewind for the waste and can be equipped with an optional hot stamp or thermal printer for variable information.

The Tach-It LB-2 is designed to handle label rolls up to 12 inch inch diameter on a 3 inch core and no special operator training is required as setup and controls are easy to use and understand. Unlike many other bottle labelers inch the industry, the Tach-It lb-2 does not require air, has a small bench top design for use anywhere, requires no tools for label changeover and has high friction non-slip silicone rollers for positive feed of the labels and rotation of the product.

To use the Tach-It LB-2 simply place the product into the adjustable cradle assembly and step on the foot pedal. The automatic overhead pressure arm will come down holding the container inch place and the container will rotate and either 1 or 2 labels will be quickly applied.

The machine is now ready for the next cycle. Note: all labels used on the LB-2 must be die-cut and have a minimum 1/8 inch (3mm) gap between labels.

Specifications:Power: 110 volt (220 volt available) 3 amp Fuse

Machine: length—22.0in. (560 mm)

Width— 12.9in. (330 mm)

Height—21.2in. (540 mm)

Weight—45 lbs. (20 kgs)

Label core: 3in. (75mm) core size on label roll

Object size: maximum dia.—4in. (90mm) minimum dia.—1/2in. (13mm)

Label size: minimum width—3/8in. (10mm)

Minimum length—3/4in. (20mm)

Maximum width—6in. (150mm)

Maximum length—9in. (230mm)

Roll Capacity: 12in. (300mm) maximum roll dia.

Call Roy Toll Free at 888-933-8498 for a competitive price on more than one LB-2 email to: rh@uslabel.net